|
EcoCVac by Dürr Ecoclean - innovative dry cleaning without compressed air
7/29/2015 |
|
|
Intermediate cleaning of powertrain parts with over 50% energy savings and high process reliability
Monschau/Germany, July 2015 - Machined powertrain components undergo intermediate cleaning to safeguard the quality of subsequent process steps. This is typically done by means of compressed air, which must be generated at a high expense of energy. With their new EcoCVac, Dürr Ecoclean offers an effective dry cleaning system that eliminates the need for compressed air. Apart from delivering enhanced process reliability, the system can provide energy savings of more than 50 percent. As maintenance of the working chamber is minimized, it also improves the machine availability.
Modern engine and transmission manufacturing lines are designed for maximum productivity and economic efficiency. Accordingly, any cause of interference with a downstream process must be eliminated. This makes it mandatory that engine and transmission parts such as, e.g., cylinder heads, engine blocks and transmission housings undergo cleaning operations between machining steps. Such intermediate cleaning is often performed by cleaning machines using compressed air. A benefit of this method is that the part is cleaned 'dry'. On the downside, however, generating the compressed air supply is very costly. Moreover, the chips and machining fluid residue adhering to the product are merely blown off - i.e., allowed to spread around in the work chamber, which will therefore become contaminated quickly. This, in turn, increases the risk of re-contamination of the product, with the possible result of impairing the next processing step.
Vacuum suction without compressed air in short cycles
With its innovative EcoCVac pre-cleaning and intermediate cleaning system, Dürr Ecoclean of Monschau/Germany has overcome these drawbacks. The equipment relies on the newly developed vacuum suction technology. This ensures that contaminants will be removed not just from the part but also from the work chamber within a mere 1.5 to 3 seconds of process time.
The EcoCVac system comprises a pressure vessel in which a vacuum is maintained permanently. This vessel is connected by a pipe to the vacuum chamber in which the part is placed. Once the chamber is closed, a powerful airflow is directed through it, thereby 'entraining' the chips sticking to the part and taking them into the vacuum vessel. A chip clean-out device integrated nearby separates chips and emulsion, allowing both to be discharged separately via a collecting bin and a flume, respectively.
More than 50 percent energy savings
In the development of the EcoCVac system, resource efficiency was a prime concern. As a result, the system affords a much-reduced energy consumption as compared to compressed-air type equipment. Assuming a compressed air consumption of 2.5 Nm3 per part at a price of 1.26 euro cents per Nm3, the cost of one compressed-air blowing cycle amounts to 3.15 euro cents per part. With the new vacuum dry cleaning process, an electric power input of 0.139 kWh per part is needed. At an estimated electricity price of 10.88 euro cents per kWh, power costs of 1.51 euro cents per part will thus be incurred. This is equal to a cost reduction by more than 50 percent.
Optimized process reliability and availability
In addition to the obvious cost benefits, the EcoCVac shines with its improved process reliability. As the chips are removed not only from the part but also from the work chamber, the risk of re-contamination is minimized. The chamber must hence be cleaned less often, and at a clearly reduced cost and effort. Moreover, unlike conventional compressed-air systems, there are no nozzles to be aligned relative to the part, e.g., during commissioning or after a collision. The system's availability rate is thus further improved. 
Photo: DE_EcoCVac_frontal
Dry cleaning without compressed air can yield energy savings of more than 50 percent in addition to process reliability gains.
Photo: DE_EcoCVac_Detail
The parts are cleaned in a vacuum chamber through which a powerful airflow is passed. This airflow not just reliably removes contaminants adhering to the part, but also conveys them out of the work chamber.
|
|
|
|
|
|
主站蜘蛛池模板：
亚洲成人中文网站|
国产愉拍91九色国产愉拍|
超级碰碰碰|
国产成人免费午夜在线观看|
国产av久久久久精东av|
中文字幕在线一区|
久久国产精品不只是精品|
国产乱妇乱子伦视频免费观看|
亚洲人妻自拍|
国产精品 精品国内自产拍|
最新午夜男女福利片视频|
人妻精品中文字幕av|
无码看片|
中文字幕无线码中文字幕|
三级精品三级三级三级|
夜夜撸影院|
日本精品人妻无码77777|
无码人妻久久一区二区三区|
99在线观看免费视频|
日本无码中出|
亚洲精选av一区二区|
91高级网站|
国产真实野战在线视频|
亚洲,一区二区三区精品视频|
男人视频一区二区三区|
中文字幕免费不卡二区|
国产午夜精品亚洲精品国产|
上海旅游集散中心网上订票|
国产精品美女久久久久av福利
|
噜噜噜噜私人影院|
少妇太爽了在线观看免费视频|
亚洲精品成a人在线观看|
成人无码A区在线观看视频|
人妻精品视频|
大地资源免费视频观看|
国产999精品2卡3卡4卡|
亚洲综合精品一区二区三区中文|
人妻一区二区三|
免费的很黄很污的视频|
国产亚洲精品97在线观看|
国产成人亚洲精品日韩激情|
