|
Rapid.Tech Science trade forum - Latest scientific findings for the innovations of tomorrow
4/13/2016 |
|
|
Erfurt, April 2016: There is still much potential for optimisation within the new technologies of Additive Manufacturing (AM) and 3D Printing. This ranges from design and development, processes and materials right through to the aftertreatment of components manufactured using AM. The Science trade forum at Rapid.Tech in Erfurt presents the latest findings from science and research as a basis for further developments and innovations. The international trade show and conference for Additive Manufacturing is among the world's foremost events in this field and will take place from 14 to 16 June 2016.
Additive Manufacturing (AM) and 3D Printing are two of the key technologies for more efficient, more sustainable and more flexible production across multiple industries. "To fully exploit the potential of these still technologies, the further development of existing solutions and innovations along the entire process chain are required", describes Professor Gerd Witt, Institute Director, Chair of Manufacturing Technology at the University of Duisburg-Essen, the demand for action. The long-standing member of Rapid.Tech's advisory board is in charge of the programme of the Science trade forum at the 13th Rapid.Tech in Erfurt on 14 and 15 June 2016. This conference area is the platform for scientists to present latest research and project results. "The forum enables scientists and employees from research and development departments to intensively exchange views on the current state of research and approaches to solutions, and to discuss their possible implementation in industry," adds Witt. The agenda of the two-day forum includes 14 peer-reviewed lectures which will be simultaneously translated (German<>English), like all presentations at the Rapid.Tech conference.
Presentation topics will include the increase of build-up rates with the material Ti6Al4V by high-power selective laser melting, and strategies to attain a constant volume build-up in Additive Manufacturing by using laser powder deposition welding. Also on the agenda are talks about the reduction in surface roughness of metal components manufactured using AM with the help of enhanced electrolytic smoothing, and the chemical aftertreatment of the surfaces of components manufactured from Ultem 9085. Machine-specific cost drivers in Additive Manufacturing using laser melting will also be discussed. One presentation will address the system dependency of optimal process parameter settings for laser sintering different thermoplastics. Another will illustrate actions and measures for optimising the geometric accuracy of laser-sintered components. The results of an examination of how powder influences the SLM process and the resulting product costs will be presented. There will also be a presentation on a model for optimising SLM processes, which considers indicators such as the quality of the whole process, process failures, adherence to the time schedule and powder waste, among other things. Using the example of a hub carrier, which was originally designed to be a cast component, the adaptation for selective laser melting by means of a design based on effective areas will be described. One contribution will discuss systematic component design for Additive Manufacturing according to the principles of bionics. New developments for the process-adjusted characterisation of the flow behaviour of powdery raw materials for beam melting processes will be presented and compared with established test methods. The programme includes an overview of different methods for the functionalisation of the gas phases of particular raw materials, the use of these methods for polymers and metals as well as the effects on the manufacturing process. One presentation will deal with the thermal and optical behaviour of powders which are functionalised with an additive for subsequent laser direct structuring (LDS) and are processed by means of selective laser sintering.
An in-depth professional exchange on specialist AM topics will be possible at the 13th Rapid.Tech, international trade show and conference for Additive Manufacturing, thanks not only to the well-established trade forums Design, Aviation, Tools, Medical Technology and "Dental Technology" and the User's Conference, but also the new conference areas of 3D Metal Printing, Additive Contract Manufacturing, Electronics and Automotive Industry. "With the expanded conference programme and the extended, three-day duration of Rapid.Tech, we are keeping abreast of the latest developments in Additive Manufacturing and 3D Printing," explains Wieland Kniffka, CEO of Messe Erfurt. The complete conference programme is available at www.rapidtech.de.
Thanks to its unique combination of trade show and specialist conference, Rapid.Tech in Erfurt is among the world's foremost events in the field of Additive Manufacturing and 3D Printing. For the fourth time FabCon 3.D, Germany's 3D Printing fair for semi-professional users and prosumers, will be held in parallel with the event. |
|
Related Exhibition:
|
|
|
 |
|
Rapid.Tech 2016
|
Trade fair and user's conference for Rapid Technology
6/14/2016 - 6/16/2016
Venue: Messe Erfurt, Erfurt, Germany
|
|
|
|
|
|
|
主站蜘蛛池模板：
久久人人爽人人爽人人片AV高请|
在线精品自拍亚洲第一区|
欧美人与动人物牲交免费观看|
国产模特众筹精品视频|
亚洲中文字幕2025|
人人爽天天碰天天躁夜夜躁|
女人裸体性做爰视频|
中字无码精油按摩中出视频|
99色色网|
国产a在视频线精品视频下载|
久久人妻超级碰碰|
中文字幕第一页国产|
亚洲第四页|
综合激情网一区二区三区|
亚洲AⅤ无码国产精品|
久久久久无码精品国产h动漫|
337P日本欧洲亚洲大胆精品555588|
熟女精品国产一区二区三区|
伊人久久影院|
欧美专区第二页|
欧美视频一区二区三区|
四虎永久免费高清视频|
永久免费无码|
亚洲色伊人|
九九热视频这里免费看|
精品乱码一区二区三四五区|
中文字幕乱码一区二区|
国产成人精品综合|
国产在线98福利播放视频免费|
99久久免费精品色老|
久久国产成人午夜av影院|
无码少妇一区二区|
小泽玛利亚区二区在线|
国产福利社区一区二区|
国产成人无码AV片在线观看不卡|
一区二区三区人妻av|
国产1区2区|
精品无码av不卡一区二区三区|
韩国免费a级毛片久久|
亚洲区视频|
无码人妻一区二区三区免费n鬼沢|
