|
|
|
| EDGECAM Mill / Turn
|
|
Multi Task Machining
The use of tail stocks, steadies, sub spindles, twin turrets along with C Axis, CY Axis and B Axis are regular features on today's Multi-Task machine tools. In this collision rich environment, the programming of these machines is made simple and safe utilising Edgecam's turning and milling combinations in a single environment.
With the addition of 4 and 5 axis simultaneous milling, the simulation of these machine tools is made even easier.
Features at a glance:
One single machining environment
Full machine tool and toolpath simulation
Reduce component cycle time
Full collision checking on component parts
Reduce machine tool prove out by graphically simulating the tool path
Support for Twin Spindle, Twin Turret, Pickoff spindle, C, Y & B axis machining
Mill/Turn Simulation Edgecam offers a full kinematic Simulation package. All the cycles and movements are supported along with the full graphics of the machine, tails stocks and steadies meaning peace of mind as the part is fully tested before reaching the actual machine tool. The simulator being a very powerful tool in its own right offering full collision detection including many display options allowing the user full control over every aspect of the simulation. Feedback is given to the user show which commands are being simulated, this will also display which elements of the program may have caused issues. Comparison tools to show the part is machined as expected and correct before outputting to the machine tool.
4/5 Axis Simultaneous Mill Turn machines have many uses and allow much more flexibility and capabilities not offered from other machine configurations. With this in mind many of these have multi axis, upper turrets, lower turret, CYB and Sub Spindles.
Edgecam uses the latest cutting technologies and machine cycles and with this offers 4/5 Axis simultaneous milling options. For many industries this is becoming a must have option on a mill turn machine tool.
Edgecam offers a wide range of 4 and 5 axis Operations and Maximum control in its cycles, with the Advanced 5 Axis options allowing even greater potential.
With the addition of 4 and 5 axis simultaneous milling the simulation of these machine tools and fixtures is made easier, even for experienced manufacturing engineers.
Features include :
Axial Milling This mode allows the user to perform milling operations using the C axis with Rotary options allowing programming along the Z Axis.
Radial Milling Allows the user to machine features around the diameter giving flexibility to the user to turn the component, then create the mill features using driven tooling.
Y Axis Milling The Y axis milling capabilities allows the engineer more control over the toolpath creation and CNC code output. Edgecam supports plane switching where available on the machine tool and keeps the CNC code to a minimum by outputting arcs as required.
B Axis Head Support In a Mill Turn environment Edgecam fully supports the use of B Axis head work whether working on single spindle or sub spindle machines.
Edgecam for B Axis lathes offers the following main features:
B Axis positioning on upper turret allowing more precise and varied approaches to Mill/Turn parts giving the engineer a more flexible approach to programming complex components.
The B Axis can be programmed to tilt to any number of angles to allow the many milling options available to tackle any number of features such as Faces, Pockets and Holes.
B Axis machining on both the main and sub spindles maximises productivity allowing optimum machine performance. These features are also supported by our Full Kinematic Simulator with collision detection when using for 4/5 Axis Simultaneous work. This provides accurate feedback of the part being cut before release to the actual machine.
Upper/Lower Turret 4 Axis Turning The Four Axis turning option in Edgecam allows major advantages and functionality which is not always easily achieve at the machine control. Edgecam programming techniques allow you to use more than one turret at the same time in the mill turn programming environment. This means you can use two fixed cutting tools in the same cycle by using a number of Four Axis commands from the Cycles menu.
Edgecam supports the use of Upper and Lower Turret configurations and will support simulation of these including features such as:
Mirrored Turning Edgecam functionality will program turret movements which are mirrored about a plane on the Z axis and shows the toolpaths lying on the opposite side of the Z plane. The mirror cycle is a very powerful command that will allow various mirrored operation to be performed, such as, a right and left handed turning tool to action a Rough Turn and also Back Turn simultaneously. Turret synchronisation will also be include where required.
Balanced Turning Another of Edgecam's many features are balanced cycles. The Upper and Lower turrets work opposite each other about the Z axis. These cycles have an additional parameter called Z Lead. Using a value here instructs the currently active turret to cut in front of the other turret by the Z Lead distance allowing increased and improved metal removal. This cycle is automatically synchronised for optimum performance.
Synchronised Turrets A feature often needed by engineers is Synchronisation between Upper and Lower Turrets. Edgecam performs this function with ease. Use of wait commands simplifies the synchronisation of the Upper and Lower turrets when wanting to use these independently.
The synchronisation function is a major requirement in order to perform start and stop procedures with the upper and lower turrets and maximise efficiency in cycle. Edgecam tvisibly defines these operations in the manufacturing sequence and none productive time is clearly shown in the sequence time line. |
|
| Related Products |
|  iMachining
SolidCAM Inc.
SolidCAM''s iMachining revolutionary CAM Toolpath and Wizard, provide unbelievable cycle time savings and tool life extension, increasing dramatically ... | |  SHIPFLOW Design
FLOWTECH International AB
Potential flow, thin boundary layer and RANS solvers with the SHIPFLOW Design pre and post processor.
Modules
SHIPFLOW DESIGN
integrated pre and ... | |  Electrodes software module
Sescoi USA Inc.
The creation of electrodes is an important stage in the complex mold-making process. With WorkNC-CAD Hybrid Modeling electrode software, users achieve ... | |  WorkNC CAM
Sescoi USA Inc.
Automatic CAD CAM for 2 to 5 axis
WorkNC CAM software is the premier automatic CNC software for surface or solid models in mold, die and tooling businesses ... | |  Lantek Flex3d Tubes
Lantek Sheet Metal Solutions
Lantek Flex3d Tubes is a member of the Lantek Flex3d family of products for the design and cutting of tubes and profiles.
Lantek Flex3d Tubes is a ... |
|
|
|
|
主站蜘蛛池模板：
亚洲欧美另类久久久精品播放的|
久久国产热精品波多野结衣av|
四虎在线成人免费观看|
99久久久国产精品免费无卡顿
|
亚洲欧美日韩愉拍自拍美利坚|
亚洲成人免费一级av|
欧美人妻在线一区二区|
亚洲国产成人无码电影|
俺去俺来也www色官网cms|
日本黄色电影网址|
99riav国产精品视频|
亚洲欧美日韩综合久久|
久久久久久久久高潮无码|
亚洲一本韩|
精品久久久无码中文字幕一丶|
国产一区二区三区AV在线无码观看|
亚洲精品人成网线在线|
国产精品一区二区三区激情|
九九色综合|
日本在线看片免费人成视频|
亚洲香蕉中文日韩V日本|
国产国拍亚洲精品永久软件|
国产美女久久久亚洲综合|
9色国产深夜内射|
婷香五月|
欧美日韩一区二区三区在线视频|
性做久久久久久久|
国产精品福利一区二区久久|
88久久久久无码国产精品|
AV不卡在线|
国产绿帽在线视频看|
亚洲色欲网|
免费无码一区二区三区蜜桃|
蜜臀av久久国产午夜|
夜夜撸影院|
成人九九|
日韩欧美亚洲国产高清在线|
免费特黄夫妻生活片|
久久伊99综合婷婷久久伊|
日韩aⅴ影视|
日韩欧美猛交xxxxx无码|
