|
Husky demonstrates range of innovative technologies for beverage packaging at NPE 2015
3/24/2015 |
|
|
including revolutionary self-cleaning mold technology for HyPET HPP5
BOLTON, Ontario - A one push-button mold cleaning in eight seconds instead of four hours, and ten times fewer cleaning interventions on a machine: Husky Injection Molding Systems today announced that at NPE 2015 (March 23 - 27, Orlando, Florida), it will provide live demonstrations of its revolutionary new self-cleaning mold technology for the HyPET® HPP5 preform manufacturing system, located at Booth #2117 in the West Hall. The new mold feature is part of the reduced maintenance package for the HyPET® HPP5 system and can extend cleaning and greasing requirements to approximately every 500,000 cycles. This represents a dramatic improvement over conventional technology in the industry.
"With cycle times getting faster, one could expect shorter maintenance intervals, more maintenance, and shorter mold life. Instead, HyPET® HPP5 overcomes the contradiction between cycle time and mold maintenance. Self-cleaning can eliminate up to 400 hours of maintenance time per year, which results in 5% more production time," said Nicolas Rivollet, Husky's Director of Business Development. Self-cleaning is a push-button that uses controlled flash of the tool to collect and remove dust built up in the vents. Completely automated, totally reliable, and consistent, self-cleaning does not require an operator to go inside the machine, and can be performed as often as needed as there is virtually zero time penalty on production.
The system at NPE will also be equipped with Husky's enhanced mold alignment technology that enables time to first refurbishment to be extended three times, while improving cycle times and part quality. Using six sensors to detect the position of the core plate with respect to the cavity plate, the HyPET® HPP5 mold alignment is a real-time, 3D measurement of the alignment displayed as constant feedback on the HMI. If misalignment occurs, the HMI provides specific instructions to resolve it. By simply turning a positioning device, the operator can re-align the tool with a resolution of a few microns, before the offset can cause excessive wear and impact quality.
Since its launch in late 2013, the HyPET® HPP5 system has had a very strong response from customers. In a short sixteen months the company has sold over seventy systems, with nearly forty installed and producing high quality preforms in customer facilities across the globe. The HyPET® HPP5 system at NPE will run a lightweight carbonated water preform application with a 10.89 gram part weight on a 96cav 50x140 pitch mold at a very aggressive 5.5 second cycle time. With this preform, HyPET® HPP5 is approximately 50% faster than the industry averages for the same type of applications.
"We continue to make significant investments to better understand the production issues our customers face so that we can offer new technologies to respond to these challenges. This is what we will demonstrate at NPE 2015," said Robert Domodossola, Vice President of Engineering and Business Development at Husky. "With our latest innovations we have paid particular attention to improving availability, as producing better parts at a lower cost for longer production intervals ensures customers can be more competitive."
Offering a whole new experience for Husky customers, the display at NPE will focus on providing visitors a more intimate opportunity to engage with Husky solutions and representatives. Holding the leading market share of high-volume PET manufacturing equipment, Husky offers a full suite of equipment and services for the plastics industry, and an unmatched level of global support in over 40 countries. Serving the industry for more than 35 years, Husky's preform injection molding workcells deliver the industry's lowest total production costs for the widest range of applications and capacity needs. Value-added services include preform development, factory planning, customer training, systems integration and complete asset management. |
|
Related Exhibition:
|
|
|
 |
|
NPE 2015
|
The International Plastics Showcase
3/23/2015 - 3/27/2015
Venue: Orange County Convention Center, Orlando FL, United States
|
|
|
|
|
|
|
主站蜘蛛池模板：
亚洲精品国产精品国自产观看|
国产精品午夜福利91|
jizz国产免费观看|
人妻无码系列一区二区三区|
亚洲天堂无码AV一二三四区|
亚洲AV无码久久久久网站蜜桃|
你拍自拍亚洲一区二区三区|
亚洲AV成人无码久久精品在|
日本免费一区二区三区|
亚洲怡春院|
男人视频一区二区三区|
337p西西人体大胆瓣开下部|
蜜臀视频一区二区在线播放|
2019亚洲午夜无码天堂|
亚洲精品粉嫩小泬50P|
97人妻中文字幕精品|
亚洲成av人av网址|
116美女极品a级毛片|
色偷偷中文在线天堂中文|
福利一区二区1000|
日韩电影精品|
国产xxxxxxx|
亚洲欧美日韩国产|
亚洲精品综合成人1区2区3区|
亚洲男人AV天堂午夜在|
成人亚洲电影|
亚洲国产成人精品av区按摩|
国产成人AV乱码免费观看|
中年熟女网|
国产成人精品三上悠亚久久|
国产偷伦|
阜康市|
中文字幕第一页在线|
国产高颜值极品嫩模视频|
julia无码中文字幕一区|
亚洲 欧美 国产 日韩 精品|
亚洲精品成a人|
日本东京热高清一区二区|
国产成人亚洲精品电影|
四虎永久地址www成人|
亚洲综合一区国产精品|
