|
Husky launches HyPET® HPP5 Preform Moulding System
11/16/2013 |
|
|
- the next step in system level performance for high volume PET preform production
BOLTON, Ontario - Husky Injection Molding Systems today announced the launch of its next generation HyPET® HPP5 preform molding system. Building upon the proven technology of the HyPET® platform, enhancements have been made to HyPET® HPP5 that make it even more capable of delivering the lowest total cost to produce while providing exceptional preform quality. These enhancements allow for up to 12% productivity improvement over the previous generation system and are complemented by all new levels of production flexibility, tooling compatibility and the industry's first integrated solution for extended mold life.
"Husky is committed to offering customers the best return on their investments through continuous innovation. When developing our new HyPET® HPP5 system, we listened to what our customers were telling us and with that feedback in mind designed a system that would help them run a more competitive injection molding operation," said Robert Domodossola, Husky's Vice President of Engineering and Business Development. "HyPET® HPP5 is the result of meaningful technology refinements to many areas that combined offer the most complete and integrated injection molding system for preform manufacturing on the market today."
Cross-generation mold compatibility
Designed to satisfy the needs of customers with a large installed base of tooling, HyPET® HPP5 offers customers the ability to utilize molds from previous generation products. Simplified cross-generation mold compatibility packages make upgrading equipment easier and help to preserve valuable floor space, while allowing customers to manufacture a complete product range. In addition, a combination of technical solutions offer enhanced production flexibility, which makes the replacement of legacy assets more viable.
Improved maintenance and extended mold life
A key enhancement to the HyPET® HPP5 system is the addition of the industry's first integrated solution for extended mold life, which helps to significantly improve performance and reduce maintenance costs. Benefits include a 60% increase between required mold maintenance intervals and extended tool life up to 10 million cycles without excessive wear or flash. Sensors ensure correct mold installation and detect misalignment between mold halves during operation. If misalignment is detected, sensors signal the operator through the Polaris™ HMI and provide specific instructions to correct misalignment, allowing the vertical position of the cold half to be adjusted and the mold aligned without the use of a crane. Additional features to reduce maintenance and machine downtime include an improved procedure to align neck rings to the cavity plate and specialized anti-wear coatings that extend greasing intervals up to 120,000 cycles.
Performance and energy improvements
The CoolPik® dehumidification unit, standard on HyPET® HPP5 systems, has also been improved by replacing the desiccant wheel dehumidification and air to water heat exchanger with refrigerator combined cooling and dehumidification. The HyPET® HPP5 offers air cooling and dehumidification efficiency improvements that can yield a more than 20% reduction in energy consumption. For carbonated soft drink preform applications, when combined with better melt control and other advantages, a cycle time improvement of up to 3% can be achieved.
Improved ease of use
The latest HyPET® HPP5 is much more sophisticated, with software and hardware that have been designed to work together seamlessly. The system has undergone considerable improvements to streamline operation, including upgrades to increase automation and simplify controls. The Polaris™ HMI has been redesigned with a 19-inch full color LCD display, more intuitive layout for easier access to screens, and the ability to monitor and control auxiliaries. Operating software and menu screens have also been enhanced to simplify start-up and logic has been provided to act on the auxiliary feedback and alarms during operation. The Altanium™ temperature controller is now also fully integrated and can be controlled using the Polaris™ HMI. Further simplifying start-up and improving ease of use is Husky's patented intelligent Mold ID technology, which provides information on mold maintenance, process set-up and operation for each start-up.
|
|
|
|
|
|
主站蜘蛛池模板：
欧美?日本?国产|
影音先锋资源网|
人妻系列无码专区无码中出|
亚洲色一色噜一噜噜噜|
午夜成人性爽爽免费视频|
99人体免费视频|
人人超碰人摸人爱|
婷婷四房综合激情五月在线|
国产色视频一区二区三区|
久久久久人妻精品一区三寸|
午夜国产精品影院在线观看|
动漫精品中文无码卡通动漫|
肉大捧一进一出免费视频|
啪啪啪啪啪网站|
亚洲国产精品日韩专区av|
亚洲AV中文无码字幕色本草|
久青草影院在线观看国产|
正在播放酒店约少妇高潮|
免费现黄频在线观看国产|
他掀开裙子把舌头伸进去添视频
|
国99久9在线 | 免费|
国模少妇无码一区二区三区|
精选二区在线观看视频|
少妇高潮喷水惨叫久久久久电影|
日韩一区二区中文|
久久综合色之久久综合|
男人的天堂a在线视频|
亚洲偷自拍另类一区二区|
亚欧美日韩香蕉在线播放视频|
一区二区三区午夜无码视频|
人妻?日韩?中文?无码?制服|
精品久久久bbbb人妻|
中文字幕国产精品自拍|
日韩午夜|
精品无码人妻|
免费无码av片在线观看网址|
老司机午夜精品视频资源|
淫色人妻网|
国产三级农村妇女在线|
秋霞午夜国产精品成人片|
国内精品久久久久影院网站|
